OTHER SERVICES
Whether you have dog scratches in your home, wear and tear just do to continuous bumping, or you’ve waited too long and we need to replace major wood components due to rot or delamination, we can repair any wood surface at a fraction of the cost it will take to replace the whole unit.
If you have dents, dings, cracks, scratches or rotting or delamination- no matter how severe, call us before replacing for a FREE Estimate today!
Example #1
Project Description:
- Re-veneered 132 panels on cracked wood door panels
- New Town Hall
- Testimonial:“Jeff did an incredible job for me and Buffelen Door on Windsor Town Hall. I loved his work. He is a true artist in repairing doors.”
Example #2
Project Description:
- Repaired scratches on Residential Cabinets
- Homeowner Comment: “Of all the work we have had done around our home, the only work I would consider “perfect” was Jeff’’s work.” Professor
Example #3
Project Description:
- Repaired 36 full door width cracks on $17,000 Teak Entry Doors
- Refinishing Process: Hand Rubbed Oil
- Door Construction: 1/64 of an inch thick Fir Veneer
- Client Testimonial:Jeff, Excellent work, beleaza (beautiful in Portuguese). We will submit the invoice for payment and definitely keep your number handy for future wood repairs and refinishing. Thank you for doing such a good job. Cliff Maillet II, Fogo de Chão, Corporate Architect
Example #4
Project Description:
- Condo Front Doors Repair
- Replaced Mouldings on Front Doors at Plaza de Monoc
- Door Construction: Solid Fir
- Process: Hand-Rubbed Oil
Example #5
Project Description:
- Refinished and Repaired 2 Front Doors
- Door Construction: Alder Veneer
- Door Manufacturer: Sun Mountain Doors
- Finishing Process: Hand-Rubbed Oil
Example #6
Project Description:
- 4 Bedroom Doors and 2 French Doors at 1.2 Million Dollar Residence
- Finishing Process: Sprayed on Lacquer
- Door Construction: Fir Veneer
Example #7
Project Description:
- Replacing Split Raised Panels and Repairs
- Replaced 2 Raised Panels and filled in 10 cracks in the Door and Frame
- Savoy Condominium Leasing Office Main Entry
- Door Construction: Alder Veneer
- Finishing Process: Brushed on Poly
Example #8
Project Description:
- Dog Scratches on Inside of Sidelites and Door
- Fixed Dog Scratches on the inside of the entryway
- Door Construction: Fir Veneer
- Finishing Process: Brushed on Poly
Example #9
Project Description:
- Rot Repair
- Hard Finish Failed and let in Moisture which turned to Rot in 4-year old door
- Door Construction: Alder Veneer
- Door Manufacturer: Sun Mountain Doors
- Finishing Process: Hand Rubbed Oil
HAIL DAMAGE DOOR REPAIR
Example #1
DOG SCRATCH DOOR REPAIR
We all love our dogs, but they can raise havoc with our doors especially. Maybe you have a dog of your own, or maybe you have a renter that has a dog. We are experts at fixing dog scratches and making your doors and other wood look like new again. We have fixed hundreds of doors with dog scratches and I always seem to forget to take the best before and after photos.
I will be loading more dog before and after photos of how we can fix dog scratches on doors, furniture, and other surfaces. In the meantime, here are a few examples below:
Example #1
Example #2
Example #3
ROT REMOVAL
Door rot removal involves cutting out the rotten parts of the wood unit and replacing it with new components- which is a much more extreme case of simple repairs. This is a very exacting process where we then epoxy the seams and faux in the finish to match the existing. This is required when the finish has failed and water has seeped in behind it. Water gets trapped and very quickly can destroy the whole unit if not addressed. Fortunately, we are one of the few companies in the US that has the expertise to do this seamlessly which can save the owner 2/3 the cost of purchasing, installing and finishing a new unit.
Example #1
RE-VENEERING
Example #1
Project Description:
- Re-veneered 6 exterior common doors that were beyond repair
- Hyatt Main St. Station
Example #2
Project Description:
- New Town Hall
- Re-veenered 177 8” x 24” panels that were split beyond repair
- New Windsor Town Hall
Homeowner Comment: “Jeff did an incredible job for me and Buffelen Door on Windsor Town Hall. I loved his work. He is a true artist in repairing doors.”
Example #3
Project Description:
- 2 Re-veneered Panels on entry doors that kept splitting
- Door Manufacturer: Sun Mountain Doors
Comment: We originally epoxied these panels after Sun Mountain Doors replaced them. They kept splitting and no one could figure out why. We decided to reveneer a piece of clear alder veneer across the entire front of these two panels which makes further splitting near impossible.
Example #4
Project Description:
- Re-Veneering 4 Doors At Valmont Community Church
Example #5
Project Description:
- Fir Veneer, Reveneering , Stripping and Refinishing
- ReVeneering on Left Sidelight from painter sandthrough
- Process: Hand Rubbed Oil on Door, with sprayed on Dye Stains
- Door Construction: 1/64th inch Fir Veneer
Example #6
Project Description:
- Touch-up and ReVeneering Bottom Panel of Oak Sidelites
- Process: Brushed on Hard Finish
- Door Construction: 1/64th inch Oak Veneer
Example #7
Project Description:
- Reveneering of 2 Pantry Doors
- Sanding down with a 48 inch sander to take off the 1/132 inch oak veneer
- Mechanical application of 1/64 inch cherry veneer to (2) 30 x 93 inch doors
Note: Re-veneering is not included in the Homeowner Course listed above. We are creating a special online course that addresses re-veneering in detail. If you would like to have me contact you when it’s available. [email protected]
